3M™ Qualitative Fit Test Apparatus, Sweet - FT-10
Details
Kit Contents:
The 3M FT-10 and FT-30 Qualitative Fit Test Apparatus Kits are designed for fit-testing any negative-pressure respirator eg 3M Disposable and Reusable Respirators.
The initial fit test is normally conducted at a training session when introducing new respiratory protective equipment. Regular repeat testing at a later date will help maintain a good fit.
Meets the performance criteria for fit testing respirators under the current OSHA Standard for Respirator Protection: 29 CFR 1910.134, Appendix A.
- One Hood
- One Collar Assembly
- Nebulizer #1 (Sensitivity)
- Nebulizer #2 (Fit Test)
- Two Sets Replacement Nebulizer Inserts
- Sensitivity Solution (#1)
- Fit Test Solution (#2)
- For Occupational Use Only
- 1 EA/Case
Test kits and accessories designed to help your organization meet OSHA fit testing requirements for respirators. The products can be used to check face-to-respirator seal on any particulate respirator or gas/vapor respirator with a particulate pre-filter.
Use of 3M™ Fit Test Kits ensures an initial good fit for respiratory protection. The largest contributor to reduced protection is poor fit.The 3M FT-10 and FT-30 Qualitative Fit Test Apparatus Kits are designed for fit-testing any negative-pressure respirator eg 3M Disposable and Reusable Respirators.
The initial fit test is normally conducted at a training session when introducing new respiratory protective equipment. Regular repeat testing at a later date will help maintain a good fit.
Meets the performance criteria for fit testing respirators under the current OSHA Standard for Respirator Protection: 29 CFR 1910.134, Appendix A.